¡¡

Heat-setting stenter

Technical parameter
¡¡

Model Circulation of hot air Heating source Thermal oil,gas or electricity
Machine hand left/right hand Cloth holding ferm Pin ,clip or pin&clip assembly
width adjustment 1800-3400mm Fabric delivery Batcher and plaiter
Scope of widthregulating 900-3200mm Selvedge detecting form Infrared selvedge-detectingwith high accuracy
Nominal speed 100m/min Chain movinq form Oil rail
Overfeeding range -10%-~+100% Quantity of heatingchamber N in 3m each
Temperature ofheating chamber 220¡æ Installed power 130kw in 8 chambers by, model-180




Technological flow


Regulating system


Collective adjustment mode:through the first one or two spindles driven by individual motor at the entry of chamber,width is adjusted£» and the rest is driven by the long shaft.


Various kinds of cloth entry combination are available for customer£§s option
Cloth entry in open width¡úpadder combination

Cloth entry in open width¡úpadder¡úcylinder dryer combination


Various kinds of delivery combination available for customer's option
Delivery device in batch form and plaiting form for woven fabric

Swing-arm plaiting device

¡¡

welcome runda.com
¡¡

¡¡

¡¡
¡¡
¡¡
¡¡
 home | about us | products | message | contact  Copyright 2004 RUNDA2008.com. All Rights Reserved