Coating Machine Operating Procedure: From Start-Up to Rewind

Four sections make it practical. Start-up: check roller surfaces and doctor blade cleanliness, air pressure, oven temperature up to setpoint, and emergency stop/limit effectiveness; thread fabric and confirm edges are parallel. Settings: enter zone temperatures, line speed, gap, and tension per the process card; first piece must be sampled cross-machine for coat weight before batch run. Running: record key parameters and sample every 30 minutes; watch fabric surface and edge curl; slow down first, then stop on anomalies. Shutdown and cleaning: cool down, release pressure, clean doctor blade and roller surfaces, flush paste piping — this is the most commonly missed step; dried residue blocks the line by next morning. The procedure must be posted at the machine, with signature lines for first-piece confirmation and parameter records — otherwise it is just paper on the wall.

How Runda handles this

Operating procedures are delivered with the machine: start-up checklist, first-piece cross-machine weight sampling, running log, and shutdown cleaning list. Combined with recipe storage, shifts and operators can produce consistent results.

Related equipment

Related questions

Wuxi Runda Dye-Finishing Equipment Factory
Qianzhou, Wuxi, Jiangsu, China 214181
Tel: +86-510-83383369 | Email: rd@runda2008.com | www.runda2008.com
Established 2004 | USCC 913202067573212793