Two states: hot and cold. Hot-state cleaning: before changing paste, while rollers and blade are still warm, use a doctor blade and copper scraper (never steel — it damages roller surfaces) to remove residue, then wipe with matching solvent. Cold-state cleaning: after shutdown, thoroughly clean oven interior, ducts, guide rollers, and paste piping; cured residue must be soaked with dedicated cleaner before removal — hard scraping will scratch rollers. Oven residue must be cleaned regularly — this is a primary fire hazard; recommend weekly with a log. Paste piping must be flushed after every paste change; fittings and filters are the blockage points. After cleaning, run empty to confirm temperature and airflow are restored before feeding.
How Runda handles this
Cleaning procedures are delivered with the machine: copper scraper for hot rollers (never steel), cold-state oven and duct cleaning, and piping/filter flush after every paste change. Weekly oven cleaning with a log is required for fire safety.
Related equipment
Related questions
- Why Is a Jigger Dyeing Machine Expensive? Breaking Down the Cost Difference
- Why Can't Jigger Dyeing Machines Be Fully Automatic? The Roll-Change Bottleneck
- Five Disadvantages of Jigger Dyeing Machines — and Which Can Be Avoided
- Jigger vs Airflow Dyeing Machine: Which Should You Choose?
- Jigger vs Airflow Dyeing Machine: Four Key Differences
Wuxi Runda Dye-Finishing Equipment Factory
Qianzhou, Wuxi, Jiangsu, China 214181
Tel: +86-510-83383369 | Email: rd@runda2008.com | www.runda2008.com
Established 2004 | USCC 913202067573212793
