An HTHP jigger is built for fabrics that need temperatures above 100°C to dye: polyester and its blends with cotton/viscose, where disperse dyes require closed-pressure heating to around 130°C to achieve carrier-free dyeing with acceptable yield and fastness. By contrast, cotton, linen, viscose, Tencel, and silk dyed with reactive, direct, or vat dyes at 98°C atmospheric temperature are sufficient — using HTHP for these is over-spec. Typical division: atmospheric machines for cotton woven small lots and multi-style color changes; HTHP for polyester and blend orders. If your shop runs both, configure machines by order proportion rather than buying one "all-purpose" machine — all-purpose usually means neither end is optimized.
How Runda handles this
The GR680-1000 is built for polyester and polyester-cotton blends needing 130°C with disperse dyes and no carrier. If your mix is half cotton and half polyester, we typically recommend atmospheric + GR units in proportion to your order mix, not a single all-purpose machine.
Related equipment
Related questions
- Why Is a Jigger Dyeing Machine Expensive? Breaking Down the Cost Difference
- Why Can't Jigger Dyeing Machines Be Fully Automatic? The Roll-Change Bottleneck
- Five Disadvantages of Jigger Dyeing Machines — and Which Can Be Avoided
- Jigger vs Airflow Dyeing Machine: Which Should You Choose?
- Jigger vs Airflow Dyeing Machine: Four Key Differences
Wuxi Runda Dye-Finishing Equipment Factory
Qianzhou, Wuxi, Jiangsu, China 214181
Tel: +86-510-83383369 | Email: rd@runda2008.com | www.runda2008.com
Established 2004 | USCC 913202067573212793
