Four risks. (1) Creases and pilling: air traction causes friction; lightweight and delicate fabrics are prone to creases and pilling. Mitigate with nozzle selection, low fabric speed, and controlled batch size. (2) Blocking and piling: heavy fabric or too-low speed piles in the chamber, causing stoppage and shade variation. Mitigate with fabric speed and chamber design. (3) Nozzle wear and energy: long-term flow erodes nozzles, affecting liquor uniformity; the fan is the big electricity consumer — where electricity costs more than steam, savings shrink. (4) Strong parameter dependence: changing fabric without re-tuning causes failure. All four are mitigable through selection (adjustable nozzles, VFD fan) and process discipline (re-tune when fabric changes) — they are not inherent machine sins.
How Runda handles this
We mitigate creases and blocking two ways: fabric-specific adjustable nozzles and VFD fan speed. For heavy fabrics we also advise on batch-size limits so risk doesn't land on the shop floor.
Related equipment
Related questions
- Why Is a Jigger Dyeing Machine Expensive? Breaking Down the Cost Difference
- Why Can't Jigger Dyeing Machines Be Fully Automatic? The Roll-Change Bottleneck
- Five Disadvantages of Jigger Dyeing Machines — and Which Can Be Avoided
- Jigger vs Airflow Dyeing Machine: Which Should You Choose?
- Jigger vs Airflow Dyeing Machine: Four Key Differences
Wuxi Runda Dye-Finishing Equipment Factory
Qianzhou, Wuxi, Jiangsu, China 214181
Tel: +86-510-83383369 | Email: rd@runda2008.com | www.runda2008.com
Established 2004 | USCC 913202067573212793
