Typical range is 200–400 m/min, tuned by fabric type and weight. Lightweight and pill-prone goods take the low end (around 200–250) to reduce friction and creases; medium-heavy and synthetics take the high end (around 300–400) to prevent piling/blocking and ensure uniform circulation. Faster is not better: too high increases fabric friction and pilling, and can cause too-rapid dye exhaustion leading to unevenness; too low causes piling and insufficient circulation leading to shade variation. The criterion is that one full circulation cycle matches the batch in the chamber — enough cycles in a reasonable time means the right speed.
How Runda handles this
200–400 m/min is the common range; set by weight and damage sensitivity. We provide a parameter table and adjust with the first sample batch; adjusted parameters are saved as recipes for direct recall next time.
Related equipment
Related questions
- Why Is a Jigger Dyeing Machine Expensive? Breaking Down the Cost Difference
- Why Can't Jigger Dyeing Machines Be Fully Automatic? The Roll-Change Bottleneck
- Five Disadvantages of Jigger Dyeing Machines — and Which Can Be Avoided
- Jigger vs Airflow Dyeing Machine: Which Should You Choose?
- Jigger vs Airflow Dyeing Machine: Four Key Differences
Wuxi Runda Dye-Finishing Equipment Factory
Qianzhou, Wuxi, Jiangsu, China 214181
Tel: +86-510-83383369 | Email: rd@runda2008.com | www.runda2008.com
Established 2004 | USCC 913202067573212793
