NSWR680-1000 Double-Frequency-Conversion Jumbo Jigger

Jigger Dyeing Series - Manufactured by Wuxi Runda Dye-Finishing Equipment Factory

NSWR680-1000 Double-Frequency-Conversion Jumbo Jigger

Jigger Dyeing

NSWR680-1000 Double-Frequency-Conversion Jumbo Jigger

Uses an imported Yaskawa frequency converter and customized PLC program controller; all required functions can be added according to user settings. Reasonable structure and safe, reliable operation.

WHERE IT IS USED

Open-width dyeing: before and after

Applications
Before and after dyeing: undyed white fabric on the left, the same fabric dyed one even red on the right
Left: before. Right: after. Illustration.
Before
Undyed white cloth.
After
The whole piece takes one even colour from edge to edge.
Typical use
Open-width cloth dyed on this jumbo jigger takes one even colour from end to end, ready for washing and finishing.

WHERE IT ENDS UP

Final products

Applications

Woven cloth dyed on this jigger is made into bedding, curtains, sofa fabric and workwear.

Illustration of a roll of white cotton fabric, folded sheets and a made bed with duvet and pillowsBeddingIllustration of a roll of cream curtain fabric, a hanging fabric panel and pleated curtains at a windowCurtainsIllustration of a roll of teal upholstery fabric, folded cloth, a two-seat sofa and a matching cushionSofa & upholsteryIllustration of a roll of navy fabric, folded heavy cloth, a work jacket and cargo trousersWorkwear

What the NSWR680-1000 double-inverter jigger is for

A jigger dyes open-width fabric by winding it from one roll to another through a small dye bath. The NSWR680-1000 is a jumbo jigger with two frequency converters, one for each roll drive. Runda fits imported Yaskawa converters and a customised PLC controller.

Two drives let the machine hold constant fabric speed and set the tension on each roll separately. That matters for tension-sensitive cloth and for keeping shade steady from the first pass to the last.

This page describes the control concept; numeric data is supplied in the data sheet on request. Roll size, width and bath volume are confirmed per order.

Published specifications: NSWR680-1000 Jumbo Jigger

ItemPublished value
TypeJumbo jigger, double frequency conversion
Frequency converterImported Yaskawa
ControlCustomised PLC program controller
FunctionsAdded to the user's settings on request
Model codeNSWR680-1000

Published data covers the control system only. Roll diameter, working width, tension range and bath volume are confirmed per order.

Typical figures for jumbo jiggers (reference values per industry standards)

ItemReference valueNote
Fabric speed20 to 120 m/minConstant speed under PLC control
Liquor ratio1:3 to 1:5Short liquor, bath only holds the lower roll
Atmospheric temperature limit95 to 98 °CFor HTHP jiggers see the GR series
Typical lot size300 to 1,500 mLarger rolls cut changeover time

Reference values per industry standards for this type of machine. Final figures for an order are confirmed in the quotation.

Selection points for the NSWR680-1000

Fabric. Open-width woven and knit fabric suit the jigger. Fine or tension-sensitive cloth gains most from independent roll drives.

Atmospheric or pressure. This is an atmospheric model. Polyester dyed with disperse dye above 100 °C needs a high-temperature pressure jigger.

Control level. The PLC is customised. Say which functions you want, such as pass counting, auto reversing, temperature profile and dosing.

Roll capacity. Give your usual roll length and diameter. The model code does not replace a confirmed capacity.

Auxiliaries. Ask about cloth discharge and a circulation unit if you batch heavy rolls.

Typical applications of the NSWR680-1000 Jumbo Jigger

  • Reactive, direct and vat dyeing of cotton woven
  • Scouring, bleaching and washing of open-width fabric
  • Dyeing of silk, nylon and rayon with tension control
  • Mid-size lots with many shade changes

Configuration options

  • Cloth discharge unit (optional)
  • Dye-liquor circulation unit (optional)
  • Dosing tank with timed addition (optional)
  • Central control for several jiggers (optional)

Items marked optional are available on request. The final configuration is confirmed on the quotation.

NSWR680-1000 Jumbo Jigger: frequently asked questions

What does double frequency conversion mean?

Each roll has its own inverter drive. The PLC controls speed and tension on both sides, so tension holds as the roll builds.

Is it an HTHP machine?

No. This is an atmospheric jumbo jigger. For pressure, see the GR680 series on the Runda site.

Which brand of inverter is used?

Runda lists imported Yaskawa frequency converters.

What details do you need for a quote?

Fabric type, width, roll size, dye class, control functions and destination country.

RELATED

Related products

All equipment types

Buying guide for this model

This model belongs to the Jigger Dyeing Machines range. See the equipment overview for every Runda model and equipment type.

Related equipment

Get a quote for the NSWR680-1000 Jumbo Jigger

Email the details below to rd@runda2008.com, or call 0510-83383369. The button opens an email with this list filled in.

  • Fabric type and width
  • Roll length and diameter
  • Dye class
  • Control functions
  • Destination
✓